Click below to Select Sportbike Model
Engine Stator Cover Gasket
We sell quality oem replacment stator cover replacement gaskets. Our gasket is used by race motorcycle, so they will be suitable for daily drivers. Best way to install a sportbike engine stator cover gasket.
"Caution" When removing bolts from stator cover, not all stator bolts will be the same length. Lay them out on work bench in the same order you removed them, so you will put them back in their right place.
Use a flat razor blade to assist removal of old gasket material or liquid gasket sealant off both surfaces.
Make sure all alignment pin are put back in the motor and not cover. This will keep the gasket in line when you put it back on.
The oil is in there because the crankshaft is in there with the starter and idler gears inside.
When setting screws back in their place, hand start them and then finish them with a hand ratchet. Torque specs are 7.0ft lbs. but always check your motorcycle manual for proper torque specs.