sportsbike accessories Where Performance and Custom Comes Together...

Honda CBR600F2 F2 Solenoid Switch Fits 1991-1994

HONDA CBR600F2 SOLENOID STARTER SWITCH

Product:
Honda CBR600F2 F2 Solenoid Switch Fits 1991-1994
Description:
Make sure you have good 30amp fuse in the solenoid (starter relay).
Step 1. Hook black jumper wire from 12 volt negative post of battery to green/red wire of terminal.
Step 2. Hook red jumper wire from 12 volt positive post of battery to yellow/red wire terminal. when you hook this wire up- You will hear a click. This clicking sound is the contacts in the starter relay.SAFETY WARNING. Once starter relay is activated- only takes a minute and it will get extremly HOT. Remove red jumper wire as soon as test is completed.
Step 3. Use your continuity tester on the large terminals of the starter relay. B is battery and M is starter motor.
There should be continuity between the large terminals while the battery is connected- and no continuity when the battery is disconnected. Hope this helps
Part:
DSC-65-103H
Make:
HONDA
Model:
CBR600F2
Years:
"1991, 1992, 1993, 1994"
Price:
$40.00






Copyright DSC Bike Shop
All Rights Reserved